forsale
02-28-2012, 05:57 PM
Price dropped by $100.
Rhean II, Single enclosure, Monoblock Phono PreAmplifier - MC/MM.
Specifications:
Frequency Response: 0 - 100 Khz. ± 0.5db
RIAA curve Deviation: < ± 0.2db, 20 hz. - 50 Khz.
Ultra low noise: 0.9nV / sq.root of Hz. @ 1khz.
Slew rate: > 15V/uSec.
THD: 10 Khz. 600 ohms: 0.002%
Selectable cartridge load: 49, 120, 330, 1000, 5000, 47500 ohms, 100pF
Selectable gain setting: 40 db.(MM), 60 db (MC)
Output Imp.: 600 ohms
Channel matching: < 1%
Dimensions: 6.5in.(W) x 7.25in.(D) x 1.25in.(H)
Features:
* Blue LED power ON indicator*
Monoblock design for better channel separation.
* Monoblocks give you greater dynamic range, eliminate cross! talk between
channels for greater channel separation. Monoblocks don't rob each other
of power during intense musical passages like some stereo power amps,
especailly in the low frequency range.
* Buffered output for greater damping factor and stability with
inadequate external cabling.
* Gold plated RCA connectors.
* Single point ground circuitry.
* True dual ± Voltage rails, dual regulated.
* Separate dual power supply for each channel
* High performance Toroidal transformers(can be wired for 110Vac or 220Vac)
* Hand picked 1% tolerance components throughout.
* Metal film resistors throughout for low noise.
* 5 way Gold grounding post for TT ground wire.
Location: Calgary. NW
it's NOT ok to contact this poster with services or other commercial interests
More... (http://calgary.en.craigslist.ca/ele/2875572671.html)
Courtesy of www.CalgaryFinder.com
Rhean II, Single enclosure, Monoblock Phono PreAmplifier - MC/MM.
Specifications:
Frequency Response: 0 - 100 Khz. ± 0.5db
RIAA curve Deviation: < ± 0.2db, 20 hz. - 50 Khz.
Ultra low noise: 0.9nV / sq.root of Hz. @ 1khz.
Slew rate: > 15V/uSec.
THD: 10 Khz. 600 ohms: 0.002%
Selectable cartridge load: 49, 120, 330, 1000, 5000, 47500 ohms, 100pF
Selectable gain setting: 40 db.(MM), 60 db (MC)
Output Imp.: 600 ohms
Channel matching: < 1%
Dimensions: 6.5in.(W) x 7.25in.(D) x 1.25in.(H)
Features:
* Blue LED power ON indicator*
Monoblock design for better channel separation.
* Monoblocks give you greater dynamic range, eliminate cross! talk between
channels for greater channel separation. Monoblocks don't rob each other
of power during intense musical passages like some stereo power amps,
especailly in the low frequency range.
* Buffered output for greater damping factor and stability with
inadequate external cabling.
* Gold plated RCA connectors.
* Single point ground circuitry.
* True dual ± Voltage rails, dual regulated.
* Separate dual power supply for each channel
* High performance Toroidal transformers(can be wired for 110Vac or 220Vac)
* Hand picked 1% tolerance components throughout.
* Metal film resistors throughout for low noise.
* 5 way Gold grounding post for TT ground wire.
Location: Calgary. NW
it's NOT ok to contact this poster with services or other commercial interests
More... (http://calgary.en.craigslist.ca/ele/2875572671.html)
Courtesy of www.CalgaryFinder.com