wireless
06-10-2023, 09:35 PM
Can anyone point me to an authoritative specification from Telus on what type of fiber should be installed between the fiber demarcation point and the location of the indoor wiring hub? I realize Telus prefers empty conduit but that might not be possible in my case.
The Telus technical guides (https://www.telus.com/en/bc/internet/fibre/build/technical-guides) only state that the fiber must be bend-insensitive but don't specify the actual type of fiber (e.g. OS1 or OS2) or what type of connectors must be available.
Thanks in advance if anyone can give me any pointers.
More... (https://forum.telus.com/t5/Internet-Home-Phone/What-type-of-fiber-to-run-between-fiber-demarc-and-wiring-hub/m-p/137109#M33759)
The Telus technical guides (https://www.telus.com/en/bc/internet/fibre/build/technical-guides) only state that the fiber must be bend-insensitive but don't specify the actual type of fiber (e.g. OS1 or OS2) or what type of connectors must be available.
Thanks in advance if anyone can give me any pointers.
More... (https://forum.telus.com/t5/Internet-Home-Phone/What-type-of-fiber-to-run-between-fiber-demarc-and-wiring-hub/m-p/137109#M33759)