forsale
03-02-2012, 08:45 PM
The Peavey 3D Mix Pro is a two-channel, two-microphone, DJ mixer with SRS stereo enhancement circuitry to enlarge the space of the left-right stereo field. Featuring a dedicated collapse button, this full-featured mixer is a must for DJs.
The 3D Mix Pro is an American made DJ mixer featuring SRS stereo enhancement circuitry, this enlarges the space of the left-right stereo field, and a collapse button allows you to drastically fold in the stereo picture. The stereo effect loop has a send to cue and engage button. This allows the effects to be monitored in the headphones, before sending them to the main outputs. The 3D Mix Pro has 100 mm faders, giving you greater channel control. Each channel has 3-band EQ, with 22 db of cut and 12 db of boost. This allows you to almost completely remove the bass, middle or treble from the channel. Both mic inputs are XLR balanced with 15 V phantom power, allowing you to use condenser microphones. A mute button with LED indicator silences both mics, and a voice-over button decreases the music output by 10 db. This is ideal for making announcements. The main outputs of the 3D Mix Pro are tip ring sleeve balanced and RCA. A balanced mono out is provided for connection to a light controller or powered sub. Used, but in good condition. C/w Operating Manual.
Features:
• SRS stereo image enhancement for expanding the music's space
• Loop inserts with enable and cue switches (This lets you send the effects to the headphones before you send them to the house)
• Unbalanced mono, booth, tape and headphone outputs
• 100 mm faders on the stereo channels
• Switchable 40 Hz rumble filter on main outputs
• Balanced and unbalanced main outputs
• Two microphone inputs with EQ and built-in high pass filter
• Two stereo channels, each with phono/CD and line inputs
• 3-band EQ with 22 dB of cut on each channel
• Signal present LED on each input (including mic)
• Replaceable crossfader
• Left-right pan control on main outputs
• Full control of signal routed to the headphones, including pan, split and cue level
• Internal power supply
Dimensions:
• Weight: 8.30 lbs.
• Width: 19 in.
• Depth: 4.3750 in.
• Height: 7.75 in.
Location: Calgary, Alberta
it's NOT ok to contact this poster with services or other commercial interests
More... (http://calgary.en.craigslist.ca/ele/2881295580.html)
Courtesy of www.CalgaryFinder.com
The 3D Mix Pro is an American made DJ mixer featuring SRS stereo enhancement circuitry, this enlarges the space of the left-right stereo field, and a collapse button allows you to drastically fold in the stereo picture. The stereo effect loop has a send to cue and engage button. This allows the effects to be monitored in the headphones, before sending them to the main outputs. The 3D Mix Pro has 100 mm faders, giving you greater channel control. Each channel has 3-band EQ, with 22 db of cut and 12 db of boost. This allows you to almost completely remove the bass, middle or treble from the channel. Both mic inputs are XLR balanced with 15 V phantom power, allowing you to use condenser microphones. A mute button with LED indicator silences both mics, and a voice-over button decreases the music output by 10 db. This is ideal for making announcements. The main outputs of the 3D Mix Pro are tip ring sleeve balanced and RCA. A balanced mono out is provided for connection to a light controller or powered sub. Used, but in good condition. C/w Operating Manual.
Features:
• SRS stereo image enhancement for expanding the music's space
• Loop inserts with enable and cue switches (This lets you send the effects to the headphones before you send them to the house)
• Unbalanced mono, booth, tape and headphone outputs
• 100 mm faders on the stereo channels
• Switchable 40 Hz rumble filter on main outputs
• Balanced and unbalanced main outputs
• Two microphone inputs with EQ and built-in high pass filter
• Two stereo channels, each with phono/CD and line inputs
• 3-band EQ with 22 dB of cut on each channel
• Signal present LED on each input (including mic)
• Replaceable crossfader
• Left-right pan control on main outputs
• Full control of signal routed to the headphones, including pan, split and cue level
• Internal power supply
Dimensions:
• Weight: 8.30 lbs.
• Width: 19 in.
• Depth: 4.3750 in.
• Height: 7.75 in.
Location: Calgary, Alberta
it's NOT ok to contact this poster with services or other commercial interests
More... (http://calgary.en.craigslist.ca/ele/2881295580.html)
Courtesy of www.CalgaryFinder.com